Top MenuThe Paint Spot

Pebeo Bio-based Crystal Casting Resin

Pebeo Bio-based  Crystal Casting Resin Click image to zoom
Description

Transparent, glossy and solid, Crystal resin is ideal for casting in moulds or on rimmed supports (jewellery, frames), inclusions and even as a protective varnish. You can add dried plants to the casts. Once cured, the resin will not withstand prolonged contact at temperatures above 50°C or below 0°C.

  • Two component epoxy resin system: 50%** bio-based resin and hardener (**bio-based carbon represents on average 50% of the total carbon present in the resin)
  • Transparent, glossy and solid
  •  Mixing: 1 part Crystal B hardener to 2 parts Chrystal A resin
  • Casting thickness: up to 2 cm thick, it is not recommended for casting large pieces
  • Setting time: Dry: 12h / Fully set: 24h
  • Cleaning tools before beginning: With a dry cloth (brushes, spalters and spatulas) and 70% alcohol (commercially available) or alcohol gel.
  • Storage: In their original packaging, fully sealed, and stored at between 15° C and 25° C. Keep away from freezing temperatures. 6 months in the sealed bottle after opening.

Technical Information PDF

2020 Copyright The Paint Spot. All rights reserved. FIMEDIA

#

Newsletter Sign-up:


By submitting this form, you are consenting to receive marketing emails from: The Paint Spot, 10032 81 Avenue, Edmonton, AB, T6E 1W8, http://www.paintspot.ca. You can revoke your consent to receive emails at any time by using the SafeUnsubscribe® link, found at the bottom of every email. Emails are serviced by Constant Contact
X